background image

4

Installation

User Manual

SERENE HB80/110

1

  Installation

Safety First

Always observe safety precautions when using any electrical appliance. 
Read these instructions carefully and retain them for future reference.

When the appliance is used by or near young children or infirm persons, 
close supervision is necessary, especially to ensure children do not play 
with it.

Do 

not

 use this appliance for other than its intended use.

Do 

not

 cover the grilles or block the entry or exhaust of airflow by 

placing objects up against the refrigeration system.

Do 

not

 probe any opening.

Only use this appliance with the voltage specified on the cabinet rating 
label affixed to the appliance.

Ensure the appliance has adequate ventilation as this is essential to 
economical, high performance.

Be careful not to touch moving parts and hot surfaces.

For your own safety and that of others, ensure that all electrical work is 
done by authorised personnel.

If the power supply flexible cord becomes damaged, it must be replaced 
by an authorised service agent or similarly qualified person in order to 
avoid a hazard.

This appliance is not designed to be stable in motion. Use extreme 
caution when moving or transporting it.

Ensure all necessary safety precautions are observed during installation 
or removal of the appliance.

Do 

not

 store explosive substances such as aerosol cans with a 

flammable propellant in this appliance.

WARNING

Always

 disconnect the cooler from the mains power supply 

before cleaning or maintenance.

CAUTION

Never

 overload the power supply, which could damage the 

cooler and product. See the rating label inside the cabinet for 

the safe power supply and current draw.

Содержание serene HB110











Отзывы: