22
Replacement Procedures
Service Manual
TCE1000N
7
Replacement Procedures
Lighting
The cooler is fitted with LED interior lights and LED sign lights. Ensure the
light is replaced with the same light type. Fluorescent or LED tubes cannot
be used in place of LED modular lights.
Refer to the table below for replacement light specifications.
Light specifications
The lighting is made up of three components which are replaceable:
LED modular light
Light power supply (1 per cabinet)
Interior wiring loom (1 per door)
Power is supplied to the lights by the power supply (located in the cabinet
electrics panel above the doors) via the wiring loom/s which run down the
sidelight channel.
Lighting components are all non serviceable items. If a component is faulty,
it should be removed and a SKOPE OEM new replacement component
fitted.
Refer to the diagnostics table below to determine what component may be
at fault, and the procedures over the next few pages for component
replacement instructions.
Ensure the cabinet is isolated from the power supply before cleaning or
removing parts.
IMPORTANT
Replace the light with the same SKOPE OEM part.
DO NOT
use alternative LED strip or tube lights, or fluorescent
tubes.
Model
Interior light
Sign light
Description
Part No.
Description
Part No.
TCE1000N
interior light
HB0074091499A Sign light
HB0074091499A
