21
TCE1000N
Installation
Service Manual
Shelves
The chiller is fitted with five wire shelves per door, which may be positioned
at different heights to suit various products
Shelf Clips
Each wire shelf is held in place with four shelf clips, which engage in the
shelf support strips and slide up and down to the desired shelf position.
The support strips are numbered for easy location of shelf clips. View the
numbers in the bottom LH corner of the shelf clip.
To fit a shelf clip
To adjust the shelf clip height
To remove a shelf clip
Repositioning
Shelves
When repositioning standard shelves, unload and remove the shelf,
establish the desired position and slide the shelf clip in each of the shelf
support strips to the desired position. Sit the shelves on the shelf clips.
1. The shelf clip twists onto
the shelf support strip.
Locate the square pin on
the back of the clip into
the support strip, and
twist the clip so that it
sits level and locks in
place..
1. Twist shelf clip off the
shelf support strip. Go
up or down to select clip
next position. Engage
the square pin onto shelf
clip location point. Twist
the shelf clip back onto
the support strip and
lock into position.
1. Twist the shelf clip left or right at 45° and pull directly back to release clip.
Shelf support
strip
Shelf clip
Shelf clip location
point
Shelf clip
Shelf clip
location point
