24
6. Snap the table insert back into place
(Fig. 19a & Fig. 19b).
NOTE: The table insert should be mounted in
the way that the blade is allowed to go through
the slot of the table insert when beveling the
table.
Attaching blade adaptors to plain-end blade
For front cutting
Required tool:
2.5mm L wrench
a. Loosen the set screw just enough to
slide one adaptor onto each end of the
blade
(Fig. 20).
b. Place the blade and adaptors into the
blade gauge to set the blade to the
proper length, and securely tighten the
set screw.
Fig. 19a
Table Insert
Slot
Pin-end
Blade
Fig. 19b
Plain-end
Blade
Fig. 20
Plain-end
Blade
Adaptor
Pin
Set Screw
Blade Adaptors
in Blade Gauge
