Skil F0123710 Series, Руководство пользователя

Страница: 27 / 31

27
Maximum Workpiece Dimensions [mm]
Workpiece
Form
Miter Angle Miter Angle
0 ° 45 ° 0 ° 45 °
125 Ø 115 Ø 72 Ø 72 Ø
115 x 115 95 x 95 65 x 65 60 x 60
110 x 130 100 x 95 60 x 120 60 x 70
137 x 137 100 x 100 90 x90 85 x 85
Adjusting the Depth Stop
(see figure E)
I n the delivery condition of the machine, the depth stop
4 is adjusted in such a manner that a new
355mm cutting disc does not touch the base plate
when cutting.
To compensate the wear of the cutting disc, the depth
stop can be set deeper.
When using a new cutting disc, the depth stop must
then always be set back to the original position.
Always adjust the depth stop in such a manner X
that the cutting disc does not touch the base
plate when cutting.
Place the machine in the working position. (see –
“Releasing the Machine (Working Position)”,
page10)
Loosen the lock nut – 5 with the box-end wrench 8
(size 13mm) provided.
Swing the tool arm with the handle – 1 to the
requested position.
Screw the depth stop – 4 in clockwise or
counterclockwise direction until the screw head
touches the housing.
Slowly guide the tool arm upward and tighten the –
lock nut 5 .
F0123710AA F0123710AB/JA/JB/JC