Skil F0123710 Series, Руководство пользователя

Страница: 23 / 31

23
Operate the power tool only when the work area X
to the workpiece is clear of any adjusting tools,
metal chips, etc. Small pieces of metal or other
objects that come in contact with the rotating cutting
disc can strike the operator with high speed.
Always firmly clamp the workpiece. Do not X
cut workpieces that are too small to clamp.
Otherwise, the clearance of your hand to the
rotating cutting disc is too small.
Pay attention that persons are not put in danger
X
by sparking. Remove any combustible materials in
the vicinity. Sparks develop when cutting metal.
Use the cut off grinder only for cutting materials X
mentioned under “Intended Use”. Otherwise, the
cut off grinder can be subject to overload.
Do not use damaged, out-of-center or vibrating
X
cutting discs. Damaged cutting discs cause
increased friction, binding of the cutting disc
and kickback.
Always use cutting discs with correct size and X
shape (diamond versus round) of arbor holes.
Cutting discs that do not match the mounting
hardware of the cut off grinder will run eccentrically,
causing loss of control.
Do not touch the cutting disc after working X
before it has cooled. The cutting disc becomes
very hot while working.
Symbols
The following symbols may be of meaning for the use
of your power tool. Please take note of the symbols
and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better
and safer manner.
Symbol Meaning
Danger area! Keep hands, X
fingers or arms away from
this area.
Wear safety goggles. X
Wear hearing protection.
X
Exposure to noise can cause
hearing loss
Wear a dust respirator. X
Wear protective gloves. X
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Intended Use
The machine is intended for stationary use with cutting
disks to perform lengthways and crossways straight
cuts or mitre cuts to 45° in metal materials without the
use of water.