Ski-Doo MX Z 800 2145 2002, Руководство оператора

Страница: 35 / 123

33
Readjust throttle lever housing and brake lever housing accordingly
to optimal angle so that you will not need to release your grip to
operate levers.
6) Start/RER Button
General
The START/RER button has two functions.
When the engine is not running, depressing the START/RER button
will engage the electric starter on vehicle so equipped and start the
engine.
When the engine is running, depressing the START/RER button will
command the engine to reverse crankshaft rotation as driving the
snowmobile in reverse is achieved by changing the direction of rota-
tion of the engine, not by shifting the chaincase in reverse gear.
When depressing the START/RER button, the MPEM (Multi-Purpose
Electronic Module) will practically slow down the engine RPM to a
stop and advance the ignition timing to cause crankshaft rotation re-
versing.
Engine will automatically shift into forward when starting after stop-
ping or stalling.
Shifting procedure will take place only when the engine is running.

WARNING
Adjust with vehicle at rest in a safe place. Securely retighten
all fasteners. Never rotate throttle lever to operate with fingers
instead of thumb.

WARNING
The shifting in reverse mode on these snowmobiles is done by
the push of the START/RER button when the engine is running.
Wait until the reverse alarm sounds and the DESS/RER indica-
tor lamp comes on in the cluster gauge before operating throt-
tle to proceed in reverse. The reverse speed of these snowmo-
biles is not limited. Always proceed with caution as fast
reverse could result in loss of vehicle stability. Come to com-
plete stop before selecting reverse gear. Always remain seated
and apply the brake before shifting. Ensure the path behind is
clear of obstacles or bystanders before preceeding.
Mmo2002-006b.book Page 33 Thursday, November 29, 2001 2:31 PM