Ski-Doo EXPEDITION TUV, Руководство оператора

Страница: 38 / 135


WARNING
Fast reverse while turning, could
result in loss of stability and con-
trol.
Handlebar height is adjustable. See an
authorized SKI-DOO dealer.
7) Holding Strap
Holding strap provides a grip for driver
when side-hilling.

WARNING
This strap is not for towing, lifting
or other purpose than temporary
use as a grab handle during side-
hilling. Always keep at least one
hand on the handlebar.
8) Ignition Switch/Start
Button
Ignition Switch
550F Models
1 1
2
2
3
A23H04A
MANUAL START/ELECTRIC START
1. OFF
2. ON
3. START
Manual Starting
To start the engine, first turn the key to
ON position, then pull rewind starter
handle. To stop the engine, turn the
key to OFF position. See illustration
above.
Electric Starting
To start engine, turn key to START po-
sition and hold until engine has start-
ed. See illustration above.
CAUTION: Do not engage electric
starter for more than 10 seconds
at a time. A rest period should be
observed between the cranking cy-
cles to allow electric starter to cool
down. Using electric starter when
engine has started could damage
electric starter mechanism.
Release the key as soon as the engine
starts. Key returns to ON position as
soon as it is released.
If the engine does not start on the first
try, turn the key back to OFF and wait
a few seconds before restarting. To
stop engine, turn the key to OFF.
NOTE: Engine may be manually start-
ed with rewind starter if necessary.
If starter does not operate, check start-
ing system fuse condition. Refer to
STARTING SYSTEM AND ELECTRIC
POWER OUTLET FUSE
.
Start Button
All Models except 550F
To start engine, push START button
and hold until engine has started.
CAUTION: Do not hold START but-
ton more than 10 seconds at a time.
A rest period should be observed
between the cranking cycles to
allow starter to cool down. Hold-
ing START button when engine has
started could damage starter mech-
anism.
Release START button immediately
when engine has started.
If engine does not start on first try,
wait a few seconds then repeat pro-
cedure.
V800 Models
NOTE: If engine does not start after
the second try, wait until all lights are
shutdown then repeat procedure.
36
______________________