Ski-Doo Expedition LE, Руководство оператора

Страница: 62 / 163

CONTROLS, INSTRUMENTS AND EQUIPMENT
J-Type Hitch (European Models)
Attaching an Equipment
mmo2011-007-012_a
1. Hairpin clip
2. Safety tab
1. Remove the hairpin clip.
2. Align accessory attachment hole
with the hitch hook.
3. Push the accessory attachment
passed the safety tab.
4. Secure safety tab using the hairpin
clip.
Detaching an Equipment
1. Remove the hairpin clip.
2. Push safety tab forward to free ac-
cessory attachment from the hitch.
3. Detach accessory attachment.
4. Install hairpin clip.
23) Tilt Steering
Expedition SE Model
On the Expedition SE model, the han-
dlebar height is adjustable. To adjust,
proceed as follows:
1. Pull up the lock lever.
mmo2010-002-004_a
1. Tilt steering lock lever
2. Bring the handlebar to the desired
position and release the lock lever.
NOTE: On the other models, the steer-
ing can be set to a desired fixed po-
sition, see your Ski-Doo authorized
dealer.
24) Winch (Expedition SE
Model)
A winch is provided with this model
and can be temporarily installed at front
or rear.
Winch Stowage
The winch is stowed in the rear storage
compartment.
To remove winch from the storage
compartment, open storage compart-
ment lid as explained in
STORAGE
COMPARTMENT
above, then simply
withdraw winch.
To stow winch in the storage compart-
ment, proceed as follows:
1. Open storage compartment lid as
explained in
STORAGE COMPART-
MENT
.
2. Place winch mounting plate slots
onto tabs located at LH of storage
compartment bottom.
NOTICE
Make sure that the ca-
ble and electrical wires will not be
pinched between winch and storage
compartment bottom.
60
______________