Ski-Doo Expedition LE, Руководство оператора

Страница: 58 / 163

CONTROLS, INSTRUMENTS AND EQUIPMENT
Unit Selection (KM/H vs MPH)
The units can be set in metric or impe-
rials. Refer to an authorized Ski-Doo
dealer.
Language Selection
The gauge display language can be
changed.
Refer to an authorized
Ski-Doo dealer for language availability
and setup the gauge to your prefer-
ence.
14) Backrest
A fixed backrest is installed on the pas-
senger seat.
15) Passenger Seat (1+1)
A 1+1 passenger seat is provided as
standard equipment.
WARNING
Any passenger must be able to
firmly lay is feet on the footrests
and keep his hands on the grab
handles at all times when seated.
Respecting those physical crite-
ria is important to ensures that the
passenger is stable and to reduce
the risks of ejection.
Passenger Seat Removal
To remove the passenger seat, pro-
ceed as follows:
1. Disconnect the accessories con-
nector by turning the plastic housing
counterclockwise.
NOTE: The connector is located on the
LH side of the storage box.
mmo2009-004-016_a
1. Accessories connector
2. Install the rubber plug on the con-
nector.
3. Push the latch tab in and lift-up the
rear of seat.
mmo2009-004-017_a
Step 1: Push tab
Step 2: Lift rear of seat
4. Slide seat rearward and set aside.
Passenger Seat Installation
To install the passenger seat, proceed
as follows:
1. Place the passenger seat facing for-
ward on the storage box lid.
2. Slightly incline the passenger seat
towards front and engage both seat
hooks in the storage box lid slots.
56
______________