SKF Lincoln 215-M049, Руководство по установке

Страница: 9 / 45

Installation Instructions
Pump P 215
810-55192-1
Page 9 / 45
Rev. 012
2018/11/30
2.6. Conversions / modifications
Unauthorized conversions or modifications may result in unforeseeable impacts on
safety. Therefore, any unauthorized reconstructions or changes are expressly
prohibited.
2.7. Inspections
The following inspections were carried out prior to delivery:
•
Electrical inspections following EN 60204-1.
•
Safety and functional tests.
2.8. Warning label on the pump
Warning against hand injuries
During operation of the pump, never remove the lid and reach into
the reservoir. Risk of trapping or shearing off hands and fingers!
2.9. Other applicable documents
In addition to these instructions, the following documents must be observed by the
respective target group:
•
Operating instructions / release provisions by the operator.
•
Instructions of the components for set-up of the centralized lubrication
system.
•
Safety data sheet of the lubricant used.
Where appropriate:
•
System documentation.
•
Other relevant documents for the integration of the pump into the machine.
The owner must supplement these documents by the respective valid national
or regional regulations laid down by the country in which the product is to be
used. If the machine is sold or transferred, any associated documents must be
passed on to the subsequent operator as well.
2.10. Sources of hazard
The pump has been designed, built and tested using state-of-the-art technology. It
will have left our company only after having passed stringent safety and reliability
tests. Like for all complex machines, also for this pump there may still be involved
potential sources of hazard, for example:
2.11. Moving, rotating parts
•
Drive, stirring paddles