SKF Lincoln 215-M049, Руководство по установке

Страница: 14 / 45

Installation Instructions
Pump P 215
810-55192-1
Page 14 / 45
Rev. 012
2018/11/30
•
Only undertake drilling at non-critical, non-supporting parts. Use any
available boreholes. Do not damage lines and cables when drilling.
•
Observe possible abrasion points. Protect the parts accordingly.
•
Other aggregates of the machine / vehicle must not be adversely affected
or damaged in function by the installation of the central lubrication system.
•
All components used must be designed for:
o
maximum operating pressure
o
maximum / minimum ambient temperature
o
lubricant to be conveyed
o
operating / ambient conditions at the location of use
•
Parts of the centralized lubrication system must never be subjected to
torsion, shearing or bending.
•
Check all parts prior to use for contamination and clean if necessary.
Lubricant lines should be filled with lubricant prior to installation to make
the subsequent ventilation of the system easier.
•
Maintain the specified tightening torques. When tightening, use a
calibrated torque wrench.
•
When working with heavy parts, use suitable lifting tools.
•
Avoid confusion / incorrect installation of dismantled parts. Mark these
parts accordingly.
2.20. Initial commissioning / daily start-up
Ensure that:
•
All safety devices are completely available and functional.
•
All connections are correctly connected.
•
All parts are correctly installed.
•
All warning labels on the machine are completely available, highly visible
and undamaged.
•
Unreadable or missing warning labels must be replaced without delay.