SKF CMSS500 Series, Руководство пользователя

Страница: 5 / 76

Criteria 1.
Devices used with a Multilog Condition Monitoring Unit (CMU), Multilog Local
Monitoring Unit (LMU), including, but not limited to, the sensing device, the
interconnect cabling, junction boxes, if any, and the communications interface,
must consist only of SKF-supplied or SKF-approved devices and/or
components. The computer provided by Buyer must meet the requirements
stipulated by SKF.
Criteria 2.
SKF or its authorized service representative has installed the On-Line System
or has audited the installation and commissioned the On-Line System.
"On-Line Systems" are defined as systems consisting of Multilog Condition
Monitoring Unit(s) (CMU), Multilog Local Monitoring Unit(s) (LMU), and any
sensing or input devices, the interconnect cabling between the sensing or
input devices and the Multilog Condition Monitoring Unit(s) (CMU), Multilog
Local Monitoring Unit(s) (LMU), and the cabling between the Multilog
Condition Monitoring Unit (CMU), Multilog Local Monitoring Unit (LMU) and
the proprietary SKF communications interface with the host computer.
OTHER SKF PRODUCTS
Any SKF product supplied hereunder but not covered by this limited warranty
shall be either covered by the applicable SKF limited warranty then in place
for such product or, if no such warranty exists, shall be covered by the 90-day
warranty stated above.
THIRD PARTY PRODUCT WARRANTIES
For any third party products sold to Buyer by SKF, SKF will transfer to Buyer
any warranties made by the applicable third party product vendor to the
extent such warranties are transferable.
CONDITIONS