SKF CMSS500 Series, Руководство пользователя, Страница: 23 / 76

CMSS500 Series Transmitters
Overview
SKF Machine Condition Transmitter 2- 3
User Manual
For example: 100A indicates the transducer is a 100
mV/g low-impedance accelerometer. Other sensitivities
are available by special order.
Full Scale:
Range: English Metric Jumper
01 .5 IPS 12.5 mm/sec E2
02* 1.0 IPS 25 mm/sec E3
03 1.5 IPS 37.5 mm/sec E2 and E3
04 2.0 IPS 50 mm/sec E3 and E4
05 2.5 IPS 62.5 mm/sec E2, E3, E4
Table 2 - 3.
MCT Velocity Transmitter.
Full scale option for all velocity transmitter units is factory
preset to 02, for 0 to 1.0 IPS or to 25.0 mm/sec if not
otherwise specified in the model number.
CMSS540 Displacement Transmitter
The CMSS540 is a 4-20 mA Displacement Transmitter.
It is factory configured for compatibility with an external,
non-contact eddy-current probe/driver system. The
displacement signal is processed to determine the overall
vibration amplitude in terms of peak-to-peak
displacement.
The displacement transmitter unit is factory configured
for use with an external eddy-current probe-driver
system. The specific displacement sensitivity is identified
by four digits (for example, 200) immediately following
the basic model number on the side label. This number
is the transducer sensitivity in mV/mil.