SKF 15V-090-00087-100, Руководство пользователя, Страница: 28 / 84

INTEGRATION WITH SKF @PTITUDE OBSERVER
Enlight Collect IMx-1 System View
28 (84) SKF Enlight Collect IMx-1 System
User Manual
Revision A
o
Vibration circuit failure (2)
o
Temperature circuit failure (4)
o
Program ROM memory failure (8)
o
External Flash memory failure (16)
o
RAM memory failure (32)
o
Configuration CRC failure (64)
o
Firmware update error (128)
o
Watchdog reset (256)
o
Network instability (512)
Self-diagnostic errors may also raise a system or critical system alarm in @ptitude
Observer. Note that the network instability error can have significant ramifications for
sensor battery life and urgent action should be taken, refer
4.3.3 .
Double clicking a sensor entry or selecting it and then choosing Edit, will launch the
sensor properties dialog where extended status information can be viewed on the
second tab, named Status.
Configuration:
•
Not synchronized: the configuration held by @ptitude Monitor/Observer is
different to that in the sensor. This will not be corrected until/unless the user
initiates a synchronise action.
•
Staged: a synchronise action has been initiated.
•
Pending: Monitor has received the synchronisation request and is due to
send the sensor configuration to the gateway.
•
Gateway
– Notified: the gateway has received the new configuration.
•
Synchronized: the configuration in @ptitude Monitor/Observer and in the
sensor are verified as being the same.
Connection : Current connection status for the sensor, may indicate OK, Temporarily
unreachable or Unreachable.
Hardware ID : The unique identifier for the sensor, if the sensor is commissioned and
has successfully connected via the gateway to @ptitude Observer, it will show a
MAC address in this field.
Sensor Mode : Mesh, Leaf or Relay. Refer description and notes on Sensor Mode
and 2.4.2 .
Battery (%) : A battery health indication of the estimated percentage battery life
remaining. Note that before a connection to the sensor has been established this
field will be empty.
Firmware Version : The firmware version that is installed in the sensor. Note that
before a connection to the sensor has been established this field will be empty.