SKC 210-1002MTX, Руководство по эксплуатации

Страница: 15 / 56

www.skcltd.com 210-PMTXM Issue L Page 13
Getting Started
When fully charged disconnect the charger jack plug from the battery pack.
2) Battery Status Indicator
The battery status indicator on the pump LCD screen shows the current battery charge level:
Fully charged. 3 bars displayed from approximately 100% to 75% capacity. Note: It is strongly
recommended to ensure that the battery is fully charged before starting a sample run.
2 bars displayed from approximately 75% to 25% capacity.
1 bar displayed below approximately 25% capacity.
Low battery. No bars and flashing outline indicates low battery. Pump automatically switches to
HOLD mode, and then SLEEP mode after 1 minute.
Battery charging. When the battery charger is connected, the battery status indicator flashes all 3
bars to indicate charging. At the end of charging the battery status indicator will stop flashing and
show 3 bars continuously.
Battery charging error. Bottom 2 bars showing continuously and top bar flashing at the end of
charging indicates a charging fault. Refer to text on page 10.