Skandika Fitness HOME RUN Series, Инструкция по сборке и руководство пользователя

Страница: 21 / 28

21
ENGLISH ENGLISH
1. First remove and unplug the power cord. Using the Allen
Wrench, turn both left and right rear roller adjustment bolts
clockwise
, usually a 1/4 turn.
NOTE: NEVER TURN the bolts more then 1/4 turn at a
time and always keep the running belt centered.
2. Test the tightness of the belt.
NOTE: Overtightening the belt can damage the tread-
mill.
3. Plug in the power cord, insert the key and walk on the
treadmill at low speed (around 2 kph/1mph) to determine if
the belt is still slipping. If the belt is still slipping, repeat the
above procedure until the walking belt has been tightened
properly.
WALKING BELT SLIPPING: If the running belt slips when used
ASSEMBLY INSTRUCTIONS
Repeat the above procedure until the walking belt is centered. It may be necessary to test walking
belt tension once you have completed the above procedure if the belt feels like it’s slipping while
walking. Refer to the below “
Walking Belt Slipping
” instructions.
Fig.12
The safety key
Fig.13
The
safety key (36) immediately disconnects the
power supply in case of an emergency, e.g. when
you fall. In order to function properly, one end of the
key should be inserted into the device (position
A
as
per illustration on left side) and the other end (clip
end) should be attached to your clothing (e.g. on the
waistband).
In case of an emergeny, just pull on the rope, which
will disconnect the key from the device and the de-
vice will stop immediately.
The running belt only starts moving, if the
safety key
has been inserted into the device properly.
Please keep the safety key securely after your work-
out and out of reach of children!