Skandika Fitness CARDIOCROSS CARBON PRO Series, Инструкция по сборке и руководство пользователя

Страница: 35 / 80

35
UK
Step 2: Assemble the handle bars
1. Mount the left mast cover (L) (41) on the bar on the left side of the mast and the right mast cover (R)
(41~1) on the bar on the right side of the mast. Adjust the mast cover on the side covers on left (42)
and right (43) side and secure them with six tapping screws (84). Please use the accompanying
Allen key and Philips head screwdriver for this purpose.
2. Place the spring washer (101), the lower handle bar (L) as well as the lower handle bar ( R) corre-
sponding to the bar of the mast and lock them with the hex head screw (70) and two flat washers
(97). Please use the accompanying 12- open end wrench for this purpose.
3. Connect the swinging arm (L) (13) with the lower handle bar (L) and lock it with the round head
Allen screw (75). Please use the accompanying Allen key and Philips head screwdriver for this
purpose. Repeat the same procedure on the right side.
Step 3: Assemble the connecting arms
1.
Use a hex head screw (71) with a flat washer (98) and a locking hex head nut (105) to attach the
rod termination (23) at the end of the lower handle bar (L). Please use the 13/14 and 12 open-end
wrench. Repeat the procedure on the right side.
2.
Use a round head Allen key (156), a flat washer (94) and a locking hex head nut (89) to fix the
outer flat rod (144) on the frame. Please use the 13/14 and 12 open end wrench for this purpose.
Then use a round head Allen screw (155), a flat washer (94) and a locking hex head nut (89) to fix
the inner flat rod (143) to the rail connection (15). Please use the 13/14 and 12 open end wrench
for this purpose.
Step 4: Assemble the cover
1. To mount the connecting cover A(L) (59) and the connecting cover B (R) (60) on both sides of lower
handle bars, fix it with four round head Philips screws (79). Please use the Allen key and Philips
screwdriver for this purpose.
2. To mount the side covers (52) on the right as well as the left pedal arm, use the four round head
Philips screw (79). Please use the accompanying Allen key and Philips screwdriver for this purpo-
se.
3. Use the round head tapping screws (84) to connect the front handle bar (L) (54) with the rear (L)
(55). Please use the accompanying Allen key and Philips screwdriver for this purpose.
4. Use the two round head Philips screw (79) to connect the front stabilizing cladding (61) with the
rear stabilizers on both sides of the frame. Please use the accompanying Allen key and Philips
screwdriver for this purpose.
5. Fix the rear stabilizing cladding (L) (62) with a round head Philips screw (79) on the guide rail (16).
Please use the accompanying Allen key and Philips screwdriver for this purpose. Repeat the pro-
cedure for the rear stabilizing cladding (R) (pos. 63) on the other side.
ASSEMBLY INSTRUCTIONS