SMT-CW230 User’s Guide
Rev 0.8
15 / 39
IP Address
Set the IP address. The default address is recommended.
Subnet Mask
Set the Subnet Mask. The default address is recommended.
Start IP
Set the start address of the device to be connected to SMT-CW230 Series.
Only the numerals on the last three digits can be changed to values between 2~253.
When setting external → internal, enter the specific IP on the Internet where security is to be set.
When setting internal → external, enter the IP of the internal LAN where security is to be set.
DNS Server
DNS is a system that changes the names of Internet Domains to IP Addresses to determine their location.
In this section, you will set the Main DNS Server. If it is changed, some devices may be disconnected
from the Internet.
Lease Time
Set the re-registration time of DHCP.
5.2.2 WAN
Internet Setting → WAN
This is a Wide Area Network setting page. You may set WiMAX connection and DHCP mode.
