SMT-CW230 User’s Guide
Rev 0.8
14 / 39
④ Click the ‘Apply’ button.
If the network connection is disconnected, the security is normally applied, so, please wait for 1~2 minutes until SMT-CW230 is rebooted
and then access the wireless network.
5.2 Internet Setting
There are three menus for network setting, LAN, WAN and LAN DHCP Info.
5.2.1 LAN
Internet Setting → LAN
This is a page for LAN setting. You may set IP address, subnet mask, Start IP, End IP, DNS server, Default Gateway, delay time, DHCP.
Items displayed on the setup screen of the LAN are as follows. After setting, you can save values by clicking the Apply button.
Sub Menu
Description