SIZZIX Big Shot Pro 660550, Инструкция пользователя

Страница: 7 / 54

6
Using Sizzix® Bigz™ Pro, Bigz XL, Bigz or Originals™ Dies
with Crease Rule*
1. Place a die on a Cutting Pad with foam side up. Place paper or desired material
to be cut on top of the die. Place the Premium Crease Pad on top of the paper
or material to create a “sandwich” (Figure C). *A Mylar Shim may be necessary;
see Troubleshooting Solutions on page 12.*
2. Place “sandwich” on top of the Adapter Pad in the Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 5.
Figure C
Material
Die
“Sandwich”
Sliding Tray
Cutting Pad
Premium Crease Pad
Mylar Shim
Using Framelits™, Thinlits™, Triplits™ or Wafer-Thin Dies
1. Place material to be cut on top of a Cutting Pad. Align die on top of material
as desired. Place Cutting Pad on top of die to create a “sandwich” (Figure D).
2. Place “sandwich” on Big Shot™ Pro Solo Platform, Solo Shim and Solo Thin-Die
Adapter (all sold separately) and place on top of the Adapter Pad in the
Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 5.
Figure D
Paper
Die
Cutting Pad
Cutting Pad
“Sandwich”
Sliding Tray
Solo Platform
Solo Shim
Solo Thin-
Die Adapter
Adapter Pad
Adapter Pad