SIZZIX Big Shot Pro 660550, Инструкция пользователя

Страница: 6 / 54

5
Using Any Size Sizzix® Bigz™, Originals™ or On the Edge™ Die
without Crease Rule*
1. Place a die onto an appropriately sized Cutting Pad. Place paper or desired
material to be cut on top of the die. Place another appropriately sized Cutting
Pad on top of the paper or material to create a “sandwich” (Figure B).
2. Place “sandwich” on top of the Adapter Pad in the Sliding Tray.
3. Push Sliding Tray into the opening of the Big Shot™ Pro Machine. Keep hands
away from roller and dies while in use.
4. Note the rotation of the Crank Handle and continue to rotate it in the same
direction until the “sandwich” has passed through the opening of the rollers.
Dies can be passed through the rollers in either direction, from the right or
from the left.
5. Remove the “sandwich” from the Big Shot Pro. Your die-cut shapes are ready
to use!
* A Crease-Rule Die is similar to a regular Bigz (steel-rule) Die; however, it contains
both cutting (sharp) rule and crease (blunt) rule.
4 . Operating Instructions
WARNING
Pinch and cutting hazard. Keep hands, fingers
and clothing away from contact with rollers
and dies while in use.
See Die and Accessory Compatibility Table on Page 14
Figure B
Material
Die
Premium Crease Pad
Cutting Pad
“Sandwich”
Sliding Tray
Adapter Pad