SIZZIX Big Shot Pro 660550, Инструкция пользователя

Страница: 4 / 54

3
The Sizzix® Big Shot™ Pro Machine package includes all tools and parts necessary
for full assembly and operation. The Big Shot Pro Machine will cut and emboss
a wide variety of materials with the entire line of Ellison® and Sizzix dies and
embossing tools. See the Materials Guide (page 13) for specifics. When not in use,
place the dies in Ellison and Sizzix Storage Solutions (sold separately).
1 . Introduction
Lift the Big Shot Pro Machine by its molded handholds at the ends of the
Machine. Place the Machine on a clean, flat, sturdy, non-skid surface at a height
and position that are comfortable for the user. No part of the Machine should
hang over the edge of the work surface.
2 . Machine Placement
3 . Setting up the Big Shot Pro Machine
Parts included:
Item:
Qty:
(1) Crank Handle 1
(2) Lock Washer 1
(3) Screw 1
(4) Screw Cap Cover 1
(5) Sliding Tray 1
(6) Cutting Pad 1
(7) Adapter Pad 1
(8) Premium Crease Pad 1
(9) Mylar Shims (
0.1mm
) 2
Tools required:
3mm Allen Wrench (Included)
Die Pick (Included)
( 1 ) Crank Handle
Die Pick
(2) Lock Washer (3) Screw (4) Screw Cap Cover
(7) Adapter Pad
14 1/4" x 12 1/4" x 3/16"
(36.20cm x 31.12cm x 0.50cm)
(8) Premium Crease Pad
14 1/4" x 12 1/4" x 1/8"
(36.20cm x 31.12cm x 0.32cm)
(9) Mylar Shims
0.1mm x 2
3mm Allen Wrench
(6) Cutting Pad
14 1/4" x 12 1/4" x 1/8"
(36.20cm x 31.12cm x 0.32cm)
(5) Sliding Tray
15 5/8" x 12 7/8" x 5/8"
(39.69cm x 32.70cm x 1.59cm)