18
6.
Next plug the small modular connectors into the blade box
mounted on the center frame.
7.
Locate the Electronic Control Module (ECM) at the head end
of the bed. Connect the hospital grade power cord provided
and the hand control cord to the ECM.
8.
The hand control for the bed is routed to the center of the
bed and should be routed to exit the bed either on the left or
the right side, hanger hooks are provided to secure the cable
from the floor.
9.
Install the mattress stop rail.
Carefully remove the protective covering from the mattress.
Slide the mattress onto the bed frame.
NOTE
: DO NOT use a sharp object to cut protective
covering on the mattress as you may damage the mattress
covering.
10.
Position the bed at least 12” (30.48 cm) from any walls. This will prevent any damage to
the walls while the bed is in movement.
11.
Lock the casters into their proper position as indicated by the stickers located near the
casters on the bed.
NOTE
: This step is imperative. The bed may fail if the casters are not placed in the
proper position prior to use.
