32
Bed Exit Alarm: Set Alert Tones
There are 5 different audible alarm tones for the bed exit alarm. The user will hear each of the
different tones as they scroll through the 5 selections.
1.
Access the Menu by pressing the UP or DOWN arrow until Bed
EXIT SETTINGS is highlighted and then press ENTER.
2.
Select SET ALERT TONE and then press ENTER.
3.
Using the arrows, select one of the 5 tones and then press
ENTER. The selection has now been completed and the user
will return to the Home Screen.
Bed Exit Alarm: Record Message
The Bed Exit Menu will allow you to change the alert type, alert tone, and also let you record a
message to the patient so they are not startled by the tones of the bed exit alarm. This unit is also
equipped with a Nurse Call Interface which will activate the nurse call whether the unit is set to
alert tone or voice message.
NOTE:
The unit must be connected to the interface in order for the nurse call to activate.
1.
Access the Menu by pressing the UP or DOWN arrow until BED
EXIT SETTINGS is highlighted and then press ENTER.
2.
Select RECORD MESSAGE and then press ENTER.
3.
Press and hold the ENTER button until the user hears a series of
beeps. With the ENTER button still pressed, the user may begin
to record a message by speaking directly into the microphone.
The message can be recorded for a maximum length of 15
seconds. When the recording is finished, release the ENTER
button and follow the on-screen prompts.
