33
Scale System: Adjust Weight
This feature is designed to manually adjust the weight if items were added to the bed without
using the Add/Remove option. The user will need to make sure the patient’s weight is known
before using this option.
1.
Access the menu by pressing the UP or DOWN arrows until
SCALE SETTINGS is highlighted and then press ENTER.
2.
Select ADJUST WEIGHT and then press ENTER.
3.
Adjust the weight that is added or removed from the bed in 0.5 lb. increments using the
up or down arrow and then press ENTER. The user will now return to the Home Screen.
NOTE:
The adjusted weight will return to 0.0 lb. when zeroing the scale as shown in the See the
section Unpacking and Set-Up Instructions Scale System: Zeroing the Scale on page 22.
Scale System: Change LBS/KGS. Setting
This feature will allow the user to display the patient’s weight in either pounds (lbs.) or
kilograms (kgs.). The default for patient weight display is pounds (lbs.). This unit has a
Lbs./Kgs. Lockout feature to prevent an accidental change of units (see the section Rest Secure
Operating Instructions Scale System: Locking/Unlocking the Unit in Lbs./Kgs. on page 34 for
instructions).
1.
Access the menu by pressing the UP or DOWN arrows until
SCALE SETTINGS is highlighted and then press ENTER.
2.
Select CHANGE LBS/KGS and then press ENTER.
3.
Select CHANGE TO KGS or
CHANGE TO LBS and then
press ENTER.
4.
The unit will return to the Home
Screen showing the weight in
kilograms or pounds dependent
upon which was chosen.
