Sixty Four Pixels Arpie, Руководство пользователя

Страница: 38 / 40

Memo Tab / Patch Saving
Memo Tab (and CV Tab) contain a memory chip that enables Arpie patches to be
saved and recalled later.
A total of 16 snapshot slots (i.e. “patches”) ca n be stored.
To save the current Arpie state as a patch, press down HOLD, then quickly press
PLEN. The screen changes to show the slot status (used slots are lit up brightly).
Press one of the slot buttons to save the current Arpie state to that slot. If there is
already data in the slot it will be overwritten. You can save to multiple slots without
having to press HOLD+PLEN again. Press a menu button (e.g. PATN) to exit from
patch save mode.
To load the Arpie state from a previous patch, press down HOLD, then quickly press
PATN. The screen changes to show the slot status. Press one of the brighter lit
(occupied) slot buttons to load the Arpie state from that slot. The HOLD LED will
automatically be engaged when the patch is loaded, so that the chord saved with the
patch is not lost. You can press HOLD again to exit hold mode and clear the chord.
To exit from the slot status display without loading a patch, just press another menu
button (e.g. PATN)
To clear one or more slots, press down HOLD, then quickly press MODE. The screen
changes to show the slot status. Press one of the brighter lit (occupied) slot buttons
to clear it. You can clear out multiple slots without having to press HOLD+MODE
again. To exit from the slot status display just press another menu button (e.g. PATN)
Tip: The last patch slot to be loaded from or saved to will blink more rapidly than
other occupied patch slots. This helps you quickly find the correct slot when saving
an edited patch.
Note: holding the HOLD button for a couple of seconds will activate the hold second
function (LED starts blinking) after which the shift function is cancelled
– this means
that to access the Memo Tab functions, the second key must be pressed immediately
after pressing HOLD.