Firmware Version Display
To check the firmware version of your Arpie, press down HOLD while powering up or
resetting. While HOLD is pressed, the data LEDs will show the current version using
the following method
Each group of 4 LEDs shows a single decimal digit, encoded in binary, with a lit LED
being a 1 and an unlit LED being a 0. The digits from 0-9 are represented as follows
LED1 LED2 LED3 LED3 Digit
0
ON
1
ON
2
ON
ON
3
ON
4
ON
ON
5
ON
ON
6
ON
ON
ON
7
ON
8
ON
ON
9
For example, the following is how version 5.12 would be displayed
Factory Reset
A reset of all Arpie saved settings can be triggered by pressing and releasing the
MODE button while the version number is displayed. i.e. Press HOLD during power
up, then while still pressing HOLD, press and release MODE. All the data LEDs
should light up briefly.
Содержание Arpie
Страница 1: ...Arpie MIDI ARPEGGIATOR User Guide Firmware V6 September 2019...
Страница 29: ......