Sixty Four Pixels Arpie, Руководство пользователя

Страница: 24 / 40

•
velocity cc - Arpie sends CC41 before each note to set the velocity. This is
specifically aimed at users of Korg Volca FM which does not respond to MIDI
velocity.
•
midi local off msg - When enabled, Arpie sends MIDI LOCAL OFF message on
each MIDI channel at start-up time. Toggling the setting also sends LOCAL
OFF or LOCAL ON messages (depending on the new value of the setting) at
the time the button is pressed.
• midi note off msg – Arpie usually uses a zero velocity note on message to
silence notes – this allows more efficient use of the MIDI bandwidth via
‘running status’. However, some older synths might need a “real” note off
message to stop notes playing. Enabling this option means these note off
messages will be used, which can help prevent stuck note issues.
•
resync – resets the internal beat counter when pressed. This allow the Arpie
sequencer to be brought into phase with another device that is providing a
master clock.
Note: MIDI thru is handed in Arpie ’ s firmware (there is no hardware thru) which can
cause latency if the engine is busy and possibly even dropped messages in
situations of very high thru volume.