21
5.2.10 Use pin 2 to fasten the rear arm 1. This pin is inserted into the drive gear support plate, which can
now be fastened into position. When the nuts are tightened, make sure that the shaft can rotate easily. As-
semble frame 4 on the arm together with the oscillation control system, consisting of the tie rod 9, the con-
necting rod 10 and the small wheel 11.
5.2.11 Assemble the tie rod and the hook, which blocks movement during transport, on to the side arms. The
tie rods 1 and 3 must be assembled using their medium length. Also assemble the pins and the load spring
for hook 9; pin 13 must be fastened so that it also acts as a rabbet for the hook
