17
5.2.2
Fit the protective cap 2 to
the correct mounting on
the gearbox 1 using the
flat washers 3 and the
screws 4.
For this step you will use:
Item 2: n° 2 - flat washers
D 8.5 (D 21/64)
Item 3: n° 2- screws
M8x16 (5/16x5/8)
5.2.3
Fit the axles 2 to the
main casing 1. To do this
you must initially remove
the central screws 6 and
the washers 4 & 5, which
attach
the
protective,
guard 3 to the main cas-
ing 1. Then fix the axles
2 to their correct mount-
ings on the main casing
1 using the flat washers
4, the notched washers
5 and the screws 6. For
this step you will use:
Item 4: n° 6 - flat wash-
ers D 15 (D 19/32)
Item 5: n° 6 - notched
washers D 15 (19/32)
Item 6: n° 6 - screws
M14x95
(D 19/32x3"3/4)
Warning: The gear
boxes have already been assembled on the cowls. The side cowls contain the lateral power take-
off (on the right or left-hand side according to which side it has been assembled on), whereas the
box on the rear cowl is assembled as shown in the picture. The side cowls have normal axles (as
shown in the picture), whereas the rear cowl axle uses bushings with hexagonal holes on the front
of the machine. The reason for this is that the wheel must be firmly held facing forwards in order to
guarantee the machine better forward movement. When the rear cowl is an SM/150, the axles are
straight, whereas the axles for the SM/180 and SM/230 converge towards the centre of the ma-
chine in order to decrease their overall dimensions.
5.4
5.3
