Document NO.:RD-536G-39-001
Version: C 2018.06.19
- 6 -
Diagram 7
I
nstallation sketch map:
Diagram 8
GS571E installation method:
The magnetic mounting offer a real alternative to fastening
with screw and dowel plugs. Smoke alarms can be mounted
quickly and cleanly with this magnetic assembly system.
ASSEMBLING
1. Assembling the ceiling element
The ceiling element (without magnets) has to be mounted on a
correct place as described in your smoke alarm's instruction
manual. Remove the protective foil (a) and place it against the
ceiling. Apply pressure (b) especially for the edge for at least
10 seconds. Please note it is mounted on a stable, dry and free
of dust area. Once assembled the ceiling element cannot be
removed or repositioned.
2. Assembling the smoke alarm element
The smoke alarm element (with magnets) is mounted on the
base of the smoke alarm. Remove the protective foil and place
it against the base. Apply pressure ( c ) especially for the edge
for at least 10 seconds.
3. Assembling the smoke alarm to the ceiling
Must wait for 6 hours after because of adhesive specialty.
Assembles the smoke alarm to the ceiling (e). The hook of
the ceiling element must align the gap of the smoke alarm
element (d). Rotates the smoke alarm clockwise until it stops
( f ).
(a) (b)
(c) (d)
(e) (f)
