2.6 Labeling
These symbols and notices may be found on the Safety Lock:
• notice warning of the risk of injury by moving parts inside the housing
• notice to remove the transport protection
• notice to install the proximity switches
3 Technical data
You will find the technical data for your particular model at the following loca-
tions:
• on the name plate
• in the technical data sheet
• in the accompanying supplementary information (if provided)
or:
• in the accompanying dimensional drawing (if provided)
You will find the type designation on the name plate.
3.1 Name plate
The name plate is fixed on the housing and contains the following data:
1
10
3
5
4
6
8
7
2
7
9
Fig. 1: Name plate
1
Manufacturer
6
Admissible load
2
Product designation
7
Operating pressure (min. / max.)
3
Type (e.g. KRG 45, KRGP 22)
8
Year of manufacture
4
ID number
9
Weight
5
Serial number
10 CE marking
Make sure the name plate is not damaged, removed or rendered unreadable.
Quote the data on the name plate when submitting technical queries to
SITEMA.
3.2 Pressure fluid
The following data apply to
standard designs.
Other pressure fluids may only
be used in consultation with SITEMA.
Parameter
Value Unit
Compressed air, dried and filtered
recommendation: compressed air according to ISO
8573-1:2010 [7:4:4]
- -
Min. operating pressure
3.5 bar
Min. operating pressure when using a spring base
4.5 bar
Max. operating pressure
10 bar
Operating Manual
Safety Locks series KRGP
Pneumatic / compressive load
Original instructions BA-S12-en-1-15
© SITEMA GmbH & Co. KG . G.-Braun-Straße 13 . 76187 Karlsruhe (Germany) . Phone: +49(0)721/98661-0 . Fax: -11 . www.sitema.com
8/28
