Sitec Delta, Руководство оператора

Страница: 19 / 40

...keeping you secure
Note: If the system is in standby mode, select the extension using the + and – buttons, and by
pressing the on/off button to switch on the intercom, the connection to the required extension
can be made simultaneously.
If the employee only wants to connect briefly to another extension, e.g. to answer a quick
question by another customer and then return to the first customer, this can be done as
follows:
select
Use the + and – buttons to select the extension to
which you wish to connect briefly.
The number of the extension selected (2) flashes
lightly, alternating with the dark number of the
current connection (1).
confirm
By pressing the “call receive“ button, the existing
connection is temporarily interrupted and you are
connected to the selected extension.
Pressing the button again returns you to the
original connection.
The employee and customer at the second extension can communicate with each other after
the button is pressed. The customer at the first extension cannot listen into the conversation.
When the button is pressed again, the employee can speak with the first customer again.
It is not possible to communicate with both customers simultaneously.
If the call button is pressed on an extension, a gong usually sounds on the loudspeaker of the
main control. This depends on the set up of menu function 3 in the set up menu. Please see
page 26 for further information.
The number of extension calling flashes lightly for a while in the LED display, alternating
with the dark number of the current connection.
Just as with selecting the extension, a permanent connection can be made by pressing the
on/off button, or a temporary one by pressing the “call receive” button.
19
Version 1.2