manualshive.com logo in svg

Sitec Delta, Руководство оператора

Поделиться
Скачать
Sitec Delta Скачать руководство пользователя страница 14

   
                   

          

...keeping you secure

 

 

 
 

2.3 Cancelling Standby Mode 

 
 
 
 
 
 
 
 
 
 
 

 

press 

Briefly press the on/off button. 
 
The button changes from a flashing light to a fixed 
light, indicating that the intercom is ready to operate. 
 
The swan-neck microphone ring also lights up to show 
that it is functioning. 

 
The intercom is now ready to operate and employee and customer can communicate with each 
other. Standby mode can also be cancelled automatically and depends on the set up in menu 
function 4 in the set up menu. Further information can be found on page 27. 
 
 
 

2.4 Switching Off the Intercom 

 
 
 
 
 
 
 
 
 
 
 
 

 

Press and 
hold 

 
Press the on/off button for longer than 2 seconds. 
 
The light on the button goes out, indicating that the 
intercom is switched off. 
 
The light on the swan-neck microphone ring goes out. 
 

The intercom can be switched off from either ‘on’ mode or ‘standby’ mode. This function 
should be used when the intercom is not to be used for several hours, e.g. at closing time. The 
intercom can be switched on again at any time by pressing briefly on the on/off button. 

 

   

14

Version 1.2 

Содержание Delta









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды