Sita 405 AL2, Руководство по установке, использованию и обслуживанию, Страница: 3 / 21

2
1. Introduction
This manual is for the following models of SINGLE LAMP AL SERIES:
UV 405C AL
2
- UV 405 AL
2
– 412 AL
2
This Pressure UV Systems is manufactured by S.I.T.A. s.r.l.
Warning: This equipment requires regular maintenance to ensure the requirements of the drinking
water treated and the maintenance of the improvements as stated by the manufacturer.
These operating instructions contain important information for the operation and maintenance of the
equipment.
Please ensure that these operating instructions are carefully read by all relevant persons before putting
into operation, to ensure the safe use of the UV system. The operating instructions are an integral part
of the equipment supply.
Before putting into operation, all the conditions necessary for safe operation of the equipment must be
fulfilled.
The installation, commissioning and maintenance of the equipment should only be carried out by
qualified personnel.
The equipment should only be operated by authorized personnel who have been trained accordingly.
No modifications should be made to the equipment without consulting S.I.T.A., as this could effect the
safe operation of the unit. S.I.T.A. shall not be held responsible for damage resulting from unapproved
modifications.
I
NSTRUCTION
:
The operating instructions are to be kept where they will be accessible for operating and
maintenance personnel.