Sit 845 Sigma, Инструкции по использованию и установке

Страница: 6 / 44

845 SIGMA USE AND INST
ALLA
TION INSTRUCTIONS
ENGLISH
Fig.
IMPORTANT
Do not tamper with sealed parts
Do not remove labels
Only remove dust caps when installing
(dust caps do not guarantee sealing)
Do not exceed recommended torques
Use only the specified spanner grips
shows in Fig.2 when making the
connections
Turn off gas supply before starting
installation
WARNING
DO NOT SLACkEN ASSEMbLy SCREWS
WARNING
AVOID bLOWS (kNOCkS, FALLS ETC.)
WARNING
ENSURE THAT THE GAS FLOWS IN THE DIRECTION SHOWN by
THE ARROW ON THE VALVE bODy
WARNING
DO NOT IMMERSE IN WATER OR SUbJECT THE MULTIFUNCTIONAL
GAS CONTROL TO TEMPERATURES ExCEEDING 70°C
WARNING
IF A SINGLE VALVE FALLS, DO NOT USE FOR PERFORMANCE AND
SAFETy REASONS
WARNING
DO NOT SUbJECT THE VALVE TO bENDING IN ExCESS OF 35 NM
AND TORQUE IN ExCESS OF 25 NM
WARNING
IN CASE OF OVERPRESSURE OF THE INPUT GAS ON THE VALVE > 1
bAR, REPLACE THE VALVE.
WARNING
DO NOT OPEN, INTERFERE WITH OR MODIFy THE VALVE.
WARNING
IN GENERAL, USE NEW GASkETS AFTER REMOVING AND PUTTING
bACk OF ANy PARTS.