background image

2

IMPORTANT

The Proflame transmitter is an integrated part of the Proflame System, which consists of these elements: 
• Proflame transmitter, to be used in conjunction with  Integrated Fireplaces Control (Proflame IFC)
 

The Proflame transmitter provides for controlling the following hearth appliance functions:
1.  Main Burner On/Off
2.  Main Burner flame modulation (6 levels)
3.  Choice of continuous or intermittent pilot (CPI/IPI)
4.  Thermostat and smart thermostat functions
5.  Accent light modulation (6 levels)
6.  Split flow valve
7.  On/Off relay
8.  Comfort Fan speed modulation (6 levels)

 

The Proflame transmitter uses a streamlined design with a simple button layout and informative LCD display 
(Fig. 1). A Mode Key is provided to index between the features and a Thermostat Key is used to turn on/off or 
index  through Thermostat functions (Fig. 1 & 2). Additionally, a Key Lock feature is provided (Fig. 23).

Fig. 1: Proflame transmitter 

Back lit LCD display

UP/DOwN Arrow Key

ON/OFF Key

THERMOSTAT Key
MODE Key

Fig. 2: Transmittter LCD display.

Low battery 

alarm

Key Lock

Room

Temperature

Dimmer ON

Set Point

Temperature/Level/State

Flame ON

Thermostat OFF/
ON/SMART

Comfort fan 

Transmitting

Split Flow 

Aux ON

CPI ON

Fig. A: Detach the adapter from the body

WARNING

The TRANsmITTeR ANd ReceIveR ARe RAdIo fRequeNcy devIces. 

plAcING  The  TRANsmITTeR  IN  oR  NeAR  meTAl  mAy  seveRely  Reduce  The 

sIGNAl RANGe. 

meTAllIc sTRucTuRes oR RAdIo INTeRfeReNces cAN Reduce The opeRATIve dIsTANce 

of The devIce depeNdING oN Type of fIReplAce, INsTAllATIoN ANd eNvIRomeNT.

ATTeNTIoN!

- TuRN “off” The mAIN GAs supply of The ApplIANce duRING INsTAllATIoN oR 

mAINTeNANce of The ReceIveR devIce.

-  TuRN  “off”  mAIN  GAs  supply  To  The  ApplIANce  pRIoR  To  RemovING  oR 

ReINseRTING The bATTeRIes.

- IN cAse of RemoTe coNTRol mAlfuNcTIoN TuRN off The Ifc devIce usING 

The “oN/off” mAIN sWITch.

- foR INsTAllATIoN/mAINTeNANce sWITch off The Ifc devIce RemovING mAIN 

poWeR supply pluG.

- The devIce Is NoT suITAble foR The use of RechARGAble bATTeRIes ANd ITs 

opeRATIve dIsTANce Is Reduced WITh loW bATTeRy level.

Remote control

Supply voltage 

4.5 V (three AAA LR03 1.5 V batteries)

Ambient temperature ratings 

0 - 50 °C (32 - 122 °F)

Typical operative distance in free air 

12 m  (39 ft)

Radio frequency 

315 MHz ( FCC version )

 

 

433.92 MHz ( CE version )

TechNIcAl dATA

The Proflame remote control is supplied with an adapter for wall mounting. 
Install the controller 1.5 m (5 ft) above floor level, well away from heat sources, kitchens, doors or windows. 
Metallic structures or radio interferences can reduce the operative distance of the device.
Make sure to attach the adapter in a level plane without any distortion. Proceed as follow:

• Detach the adapter from the body of the remote control; see Fig. A.
• Position the adapter on the wall, mark the points for the fixing holes and drill the wall. 
• Fix the adapter on the wall using the mounting hardware supplied with the remote control.
• Insert the remote control onto the adapter as shown in Fig. B.

WAll mouNTING

9955126_A00_Proflame_Wall_Mount_2   2

24/02/2014   15.41.57

Содержание Proflame













Отзывы: