SISTEM AIR 3203.1B, Техническое руководство

Страница: 14 / 48

Technical manual Revo Block Professional
14
06/06/2016 Rev:2.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
9 USE OF THE VACUUM CLEANER
Once the Revo Block Professional , vacuum cleaner has been connected to the power supply, it can be started
every time a flexible hose is plugged into any of the suction sockets installed in the different rooms.
The vacuum cleaning is started thanks to an electrical contact assembled directly in the socket, which once
activated, allows the start of the suction motor of the vacuum cleaning unit.
The specifically-designed electronics applied to Revo Block Professional vacuum cleaners is based on so -
phisticated software designed exclusively for Sistem Air, which alerts the operator, by means of a dedicated
messaging package, when routine maintenance should be carried out.
Such maintenance involves the dust bin being emptied and the filter cartridge being regularly cleaned.
9.1 Switching the vacuum cleaner on
9.2 Using the vacuum cleaner
Position the main switch assembled on the
right side of the appliance to «I-ON» posi -
tion. The display will switch on to indicate the
unit is connected to the power supply.
Fix the most suitable cleaning accessory for
the desired task to the grip handle of the flex -
ible hose. Select the accessories according to
the required use, the type of dirt and area to be
cleaned etc.
1
1
Insert the other end of the flexible hose in the
suction socket on the wall. This will switch on
the system suction motors by activating the
electric signal in the suction socket.
Once you have carried out the cleaning operations, remove the flexible hose from the suction
socket by gently accompanying the closing flap until it reaches its housing. If the flap is left to
close by itself, it will violently hit the suction socket because the suction system is still working
and the vacuum will pull the flap powerfully against the suction frame.
The vacuum cleaner is programmed to take a few seconds before switching off to ensure that
the suction action has been completed throughout the pipe network.
2