SISTEM AIR 3203.1B, Техническое руководство

Страница: 22 / 48

Technical manual Revo Block Professional
22
06/06/2016 Rev:2.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
16.4 Transforming DX version (outlet pipes fitted on the right) into SX version (outlet pipes
fitted on the left)
Vacuum cleaners are generally supplied with suction and exhaust pipes on the right side (RIGHT ver -
sion). If needed, the system can be transformed so to have both suction and exhaust pipe connections
on the left side (LEFT version).
To do this:
After exchanging their housings, reas -
semble the intake of the “A” suction
pipe and the “B” closing plate by fas -
tening the screws.
Now rotate by 180° the intake of the
suction pipe as shown in the picture.
Disassemble the intake of the “A”
suction pipe and the “B” closing
plate by removing the screws.
2
1
A
B
A
B
16.3 Fixing the vacuum cleaner
The unit does not need any special fixing device. For correct and safe positioning, it is however neces -
sary to check that the location selected for installing the unit features the following min. requirements:
- a solid, perfectly flat and horizontal bearing surface;
- the surface must not vibrate. Furthermore it is of utmost importance to avoid any unevenness of the
bearing surface that could make the unit unstable.