19
2
23/10/13 Rev:2.0.0
English
A
B
C
9.6 Fixing the vacuum cleaner
The unit does not need any special
fi
xing device. For a correct and safe positioning, it is however neces-
sary to check that the location selected for installing the unit features the following min. requirements:
- a solid, perfectly
fl
at and horizontal bearing surface;
- the surface must not vibrate. Furthermore it is of utmost importance to avoid any unevenness of the
bearing surface that could make the unit unstable.
9.6.1 Connection to the pipe network (see picture)
The intakes for the connection to the suction pipes network and to the pipes exhausting the air outside
can be assembled either on the right or left side of the unit.
10 STARTING THE VACUUM CLEANER
10.1 Control board
The TECNO Star Dual Power vacuum cleaner features a control board from which the appliance func-
tions can be programmed by means of a simple operator’s interface display with 6 function keys.
From the control board (display) it is possible to control and set the routine maintenance operations;
the vacuum-cleaning sockets are distributed in the various rooms and connected through the piping
network.
For this reason, the operator is never directly in contact with the appliance while the system is working,
apart from starting operations (see paragraph 11.3.1) and use of the vacuum cleaner (see paragraph 11).
Using the sleeve and the metal
clamps delivered with the vacu-
um cleaner, connect the unit to
the air suction pipe.
Using the sleeve and the metal
clamps delivered with vacuum
cleaner, connect the unit to the
exhaust pipe.
Assemble a silencer on the ex-
haust pipe; position the silencer
near the exhaust grid. Use glue
for pipes to
fi
x it.
Exhaust grid
Silencer
Suction pipe
Exhaust pipe
A
B
C