TECNO Star Dual Power instruction manual
12
23/10/13 Rev:2.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
6 - AUTHORIZED USE OF THE VACUUM CLEANER
The TECNO Star Dual Power vacuum cleaner has been designed exclusively to vacuum clean dust,
very small-size solids and dry materials.
The use of the central vacuum cleaner is authorized for household and civil uses, and connected to a
PVC wall traced piping network and to a standard home electric wiring.
The
Tecno Star Dual Power
vacuum cleaner is the ideal choice to work out and meet the most
demanding needs; it is recommended for residential dwelling units with the characteristics detailed
below:
- recommended surface to be cleaned ranging from 100 and 450 m
2
- pipe network set up with pipes with 50 mm diameter (1 operator) and 63 mm diameter (2 operators)
and Ø 63 mm inlet coupling to the vacuum cleaner
- 220/240 V ac single-phase power supply
- air exhaust conveyed to the outside through a 63 mm diameter pipe
- the system can be used simultaneously by 2 operators (only if it has been suitably dimensioned).
7 - UNAUTHORIZED USE OF THE VACUUM CLEANER
It is extremely important NOT to use the system in the following circumstances which are consid-
ered to be inappropriate and dangerous:
• The system must not be used to vacuum clean fabrics, heavy or hot/burning materials.
• The system must not be used to vacuum clean liquids.
• Do not suction cement,
fl
our or similar materials, which may cause the reduction of the vacuumed air
with a consequent damage of the motor.
Furthermore the system has not been designed for use in environments with risk of explosion,
and therefore:
• it is forbidden to suction clean materials with high explosion risk (gunpowder) or materials which are
individually inert but that, once collected and mixed in the dust bin, could provoke dangerous chemical
reactions.
• It is absolutely forbidden to use the vacuum cleaner in explosive atmosphere or outside the standard
temperature, pressure and humidity levels.
•
Do not vacuum any material which may cause electrostatic charges in the piping system, if not
previously communicated to the constructor.
Any use of the appliance other than those speci
fi
ed above is forbidden.
Any change or modi
fi
cation made to the system in order to suction clean a particular type of
material must obtain the prior written approval of the manufacturer.
The use of the system for purposes other than those for which it was manufactured, represents
an irregular condition which can cause damage to the product and seriously compromise the
operator’s safety.