Sirus UPA-612W, Руководство пользователя

Страница: 7 / 16

UPA-61W
3.3. USB-MP3 player section
29. USB PORT
For connecting with USB memory.
30. SD CARD PORT
For connecting with SD CARD memory.
31. PRE
In pause state, press this button it will go to the previous song and keep in pause state. In play+ state, press this button it will
go to the previous song and start playing.
32. NEXT
In pause state, press this button it will go to the next song and keep in pause state. In play state, press this button it will go to
the next song and start playing.
33. REPEAT
Press this button the player will change between the following four modes. REP ALL means to repeat all songs in the memory,
the mark on the LED is
ALL
. REP1 means to repeat one song, the mark on the LED is
1
.Play in order means to play the songs
according to the order, the mark on the screen is blank. Random play means to play the songs at random, the mark on the screen
is A.
34. PLAY/PAUSE
In play state, press PLAY/PAUSE button to pause the player. In pause state, press PLAY/PAUSE button to start playing.
35. STOP
In play state, press STOP button to stop playing and the whole quantity of MP3 songs in the USB memory will display on the
screen. In stop state, press the PRE/NEXT button or press the STOP button again to go to the first song and the player will keep
in pause state, then press down the PLAY/PAUSE button to play it.
36. POWER
When the unit is off, press this button hold for about 2 or 3 seconds to turn on the power supply of the player. Repeat the above
operation, you can turn off the power supply of the player.
37. USB OUTPUT
With this switch, the signal of USB can be selected to input in to CH4 or to TAPE.
3.4 REAR PANEL
38. POWER ON/OFF Switch
This switch is used to turn the unit on/off.
39. AC INPUT
Standard IEC receptacle, connect your UPA-612W to the main electrical outlet with the supplied power cord.
40. VOLTAGE SELECTOR
There are two kinds of voltages for your operation from this switch, you can select the voltage at 115V or 230V.
41. DC POWER Switch
Connect the AC supply and turn the DC power switch on, the battery can be charged.