Siruba HSM-2517, Инструкция по эксплуатации

Страница: 15 / 24

-14-
To sew down the left side. attsch right side
so that needle passes through the opening
To pipe soft furnishings,cover cord with a
bias strip of fabric and pin or tack it to the
Attach right side of zipper foot to foot holder
of foot to foot holder.
on the right side of the foot.
main piece of fabric.
PIPING
Reverse stitch lever
of zipper foot to presser foot holder so that
To sew down the right side, attach left side
the needle passes through the opening on
Lower the reverse lever for back tacking.
Reverse the machine at the end your seams
to go forward. This is called back tacking.
stitches in reverse. Then allow the machine
Secure your seams by taking the first few
INSERTING ZIPPERS
the left side of the foot.
as well.
SECURINE SEAMS
3.Pull both top and bobbin threads together towards back of machine
under the presser foot, leaving about 6 inch thread tail (15cm).
This will pull a loop of bobbin thread through the needle plate slot.
2.Lightly pull up on the needle thread.
comes to its highest position.
towards you one revolution with your right hand untial the needle
Holding needle thread loosely with your left hand, turn hand wheel
1.Raise the presser foor lever.
PICKING UP BOBBIN THREAD
2
1
3