61 97 102 D3495
D3495
.
201.03.07
.
02 08.2011
9
Sirona Dental Systems GmbH
2
Warning and safety information
Operating Instructions XIOS
Plus
Sensors
2.1
ESD protective measures
båÖäáëÜ
Electromagnetic compatibility (EMC) of the XIOS Plus Sensor
Electromagnetic compatibility (EMC)
The XIOS
Plus
sensor complies with the requirements of IEC 60601-1-2.
Medical electrical devices are subject to special precautionary measures
regarding EMC. It must be installed and operated as specified in the
document “Installation Requirements”.
Portable and mobile RF communications equipment may interfere with
medical electrical equipment. Therefore, the use of mobile wireless
phones in medical office or hospital environments must be prohibited.
Allocation of acquisition system to patient
Allocation of acquisition system to
patient
Within the scope of practice operations, unambiguous allocation of the
acquisition system to the examinee must be ensured to guarantee
reliable allocation of X-ray exposures to the patient data saved by
SIDEXIS!
XIOS Plus hygiene information
Hygiene information
The XIOS
Plus
protective sleeves and the XIOS
Plus
sensor holder tabs are
single use devices and must be renewed for each patient. The sterilizable
exposure accessories should be resterilized for each new patient to
prevent any possible transmission of infective agents which might under
certain circumstances cause serious illnesses.
Suitable hygienic measures must be taken to prevent cross
contamination between patients, users and other persons.
The sensors and the cable must be wiped disinfected before each patient!
Disturbance of electronic devices worn on the patient's body
Disturbance of electronic devices worn
on the patient's body
To prevent the malfunctioning of electronic devices and data memories,
e.g. radio-controlled watches, telephone cards etc., these objects must
be removed prior to the X-ray exposure.
Environmentally sound disposal
Your product is marked with the adjacent symbol. Within the European
Economic Area, this product is subject to Directive 2002/96/EC as well as
the corresponding national laws. This directive requires environmentally
sound recycling/disposal of the product. The product must not be
disposed of as domestic refuse!
Please observe the disposal regulations applicable in your country.
2.1
ESD protective measures
ESD protective measures
ESD
ESD stands for ElectroStatic Discharge.
ESD protective measures
ESD protective measures include:
● Procedures for preventing electrostatic charge build-up (e.g. air
conditioning, air moistening, conductive floor coverings and non-
synthetic clothing)
● Discharging the electrostatic charges of your own body on the frame
of the UNIT, the protective ground wire or large metallic objects
● Connecting yourself to ground using a wrist band.
Training
We therefore recommend that all persons working with this system be
instructed on the significance of this warning label. Furthermore, they also
should receive training in the physics of electrostatic discharges which
can occur in the practice and the destruction of electronic components
which may result if such components are touched by electrostatically
charged USERS.
