61 97 102 D3495
D3495
.
201.03.07
.
02 08.2011
23
Sirona Dental Systems GmbH
5
Use of the X-ray Sensor
Operating Instructions XIOS
Plus
Sensors
5.3
Parallel technique with radiation limiter!
båÖäáëÜ
4. For the left upper jaw and right lower jaw: Position the sensor holder
tab in the middle of the active area of the sensor as shown in the
illustration. The active area of the sensor is identified by dots on the
sensor. The edge of the sensor holder tab must be flush with the edge
of the sensor.
5. For the right upper jaw and left lower jaw: Position the sensor holder
tab in the middle of the active area of the sensor as shown in the
illustration. The active area of the sensor is identified by dots on the
sensor. The edge of the sensor holder tab must be flush with the edge
of the sensor.
X-ray image
1. Position the sensor in the patient's mouth.
2. Place the X-ray tube assembly in the correct position. Change the
position of the sensor holder if necessary.
3. Release an X-ray exposure.
4. Discard the sensor holder tab and the hygienic protective sleeve
following the patient examination.
5. The guide rod and localizer ring must be sterilized.
5.3.3
Bite wing exposures
Bite wing exposures
Explanation
The "bite tab" type sensor holder tab is available for bite wing exposures.
● This sensor holder tab and the matching localizer ring are color-
coded red.
● The straight guide rod and red localizer ring for bite wing exposures
must be used.
● The following illustrations show how to attach the sensor holder tab
to the hygienic protective sleeve with sensor.
