11
LOG LAYOUT
Figure 14
1.
Place the two centre ceramic pieces as shown. The angled edge should be in line with
the edge of the burner tray casting. On the 18” version there should be a gap of
approximately 50mm between the centre ceramics.
A
Figure 15
2.
Place two rows of 4 coals as shown above ensuring that the front coals overhang the
edge of the casting at the front and the rear coals are touching the rear wall of the
fireplace or convector box. Note: on the 16” version the right hand front coal is a
narrow coal different to the rest to allow it to be fitted at the side of the pilot (marked `A’
above).
VI-06-09
