Sirius XM RAdio Snap!, Руководство пользователя, Страница: 21 / 46

21
Options 1 & 2: Aux In Cable Installation Instructions
1 Plug one end of the Aux In Cable into the
AUDIO connector on the Snap! base.
2 Plug the other end into the auxiliary
input jack connection of your vehicle’s
stereo system.
3 Turn on your vehicle’s stereo system.
Set it to play input from the auxiliary
input source (or cassette mode if using
a cassette adapter). You should hear
XM channel 247 through your vehicle’s
stereo system. The installation is
complete. Proceed to “Subscribe” on
page 24.
4 The audio level output of the Snap! can be
increased or decreased as necessary to
match the audio levels of other sources in
your vehicle. Refer to “Set Audio Level” on page 32.
If the signal reception is good, showing at least one antenna signal strength bar
in the upper left corner of the display screen, but there is no audio when tuned
to channel 247, be sure the vehicle’s stereo system is set to the correct source,
i.e., auxiliary input source (step 3). Also be sure that the audio level is set high
enough to be heard (step 4). Refer to “Troubleshooting” on page 36 for
additional help.
AUDIO FM
Audio
Connector
Aux In Cable
Aux In
Optional Cassette
Adapter