Sirit INfinty 610, Руководство пользователя

Страница: 104 / 108

Appendix C
Disposal of the INfinity 610 Reader
96
IN finity 610 User’s Guide
C
Disposal of the INfinity 610 Reader
Prior to disposing of the IN finity 610 Reader, the battery must be removed.
The battery used in the In finity 610 is a Lithium / Manganese Dioxide
(Li/MnO2) type. This battery contains no measurable amounts of mercury,
lead, or cadmium.
Caution:
The procedure outlined in this appendix requires opening the INfinity 610
Reader case in order to remove the battery prior to disposal. Opening the
case of the INfinity 610 will void the warranty. In addition, opening the case
may adversely affect future performance of the reader.
Never open the case of the Infinity 610 Reader unless you are going to
remove the battery and dispose of the unit.
All disposal operations must be performed within local guidelines and laws. It
is the responsibility of the reader owner to ensure all local and regional laws
and regulations are followed for proper reader disposal.
To remove the battery, perform the following:
1 Remove the reader from service and disconnect any power, antenna,
and communication cables.
2 Place the reader on a static protected surface.
3 Turn the reader so the bottom of the reader is facing up as shown in
the following figure.
4 Using a Torx screwdriver, remove the six (6) Torx screws securing the
reader base to the reader enclosure.
5 Lift the base off the enclosure.
6 Remove the retaining nuts on each antenna connector