6.1.4
Time format
To set a time format
1
On the System tab, click System in the menu on the left.
2
In the Time format list, select the desired format.
Options: [yyyy/mm/dd], [dd/mm/yyyy]
3
Click Save.
The date and time format shown above the live video window will be changed according
to the selected format.
6.1.5
Time synchronisation
To sync the displayed date and time with those of your PC
1
On the System tab, click System in the menu on the left.
2
Click Sync with computer time.
3
Click Save.
Note that the time will not be synchronised if you forget to click Save.
To set the displayed date and time manually
1
On the System tab, click System in the menu on the left.
2
Click Manual.
3
Enter the date and time
Note that the entry format for date and time should match the one shown next to the
entry field (yyyy/mm/dd).
This in its turn is determined by the format that is selected on the Time format list.
4
Click Save.
To sync with an NTP server
1
On the System tab, click System in the menu on the left.
2
Select Sync with NTP server.
The Network Time Protocol (NTP) will be used to synchronise the clock of the camera
with an NTP server. For more information, refer to the website of NTP (see - http://
www.ntp.org).
3
Enter the IP address or host name of the NTP server.
4
Select an update interval.
5
Click Save.
Every time the camera boots up, it will be synchronised.
6.2
Security
From the Security pages, the administrator can perform user management, install security
certificates, and enable and configure an IP address filter.
System settings
26